Certified Copyright 2004-2017 Control4 Corporation. All rights reserved. The B&W Group Rotel Rotel A12 A12 [DriverWorks] 08/26/2016 3:26 PM 02/24/2017 2:48 PM 3 devices_sm\receiver.gif devices_lg\receiver.gif lua_gen serial DriverWorks receiver media_player media_player media_player False True True True True True True True True True 1 9 True False 115200 8 none 1 none 232 False True True True True 0 0 0 True True False 1 6 Serial RS-232 1 True False False True RS_232 3000 6 AUX 1 6 True False False True STEREO 3001 6 AUX 2 6 True False False True STEREO 3002 6 FRONT USB 6 True False False True 2 True STEREO 3003 6 PC-USB 6 True False False True 3 True STEREO 3004 6 BLUETOOTH 6 True False False True 4 True STEREO True 3005 6 PHONO 6 True False False True STEREO 3006 6 CD 6 True False False True STEREO 3007 6 TUNER 6 True False False True STEREO 3008 6 COAX 1 6 True False False True DIGITAL_COAX 3009 6 COAX 2 6 True False False True DIGITAL_COAX 3010 6 OPTICAL 1 6 True False False True DIGITAL_OPTICAL 3011 6 OPTICAL 2 6 True False False True DIGITAL_OPTICAL 4000 6 MAIN OUTPUT 6 False False False True SPEAKER STEREO 4002 6 FRONT USB Proxy Output To RECEIVER [REQUIRED] 6 False False False True 2 True STEREO True 4003 6 PC-USB Proxy Output To RECEIVER [REQUIRED] 6 False False False True 3 True STEREO True 4004 6 BLUETOOTH Proxy Output To RECEIVER [REQUIRED] 6 False False False True 4 True STEREO True 5001 6 Receiver 2 False False False False RECEIVER 5002 6 FRONT USB 2 False False False False MEDIA_PLAYER 5003 6 PC-USB 2 False False False False MEDIA_PLAYER 5004 6 BLUETOOTH 2 False False False False MEDIA_PLAYER 7000 6 MAIN OUTPUT Audio/Video End-Point 7 False True False True AUDIO_SELECTION AUDIO_VOLUME AlwaysOn 0 0 False 115200 8 none 1 none 232 Control4 certified on 2/28/2017 for software released version: 2.9.1 A12 DriverWorks 2-Way Serial Driver Driver written by the B&W Group. Any bugs please report to msheehan@bwgroupusa.com SERIAL PROTOCOL: 3 wire RS-232C protocol 115200 baud, 8 data bits, 1 stop bits, no parity, no flow control Uses a straight through type DB9 serial cable. A NOTE ABOUT POWER CONTROL: This driver does not use the ON or OFF commands. The CONNECT_OUTPUT and DISCONNECT_OUTPUT codes are used to power the unit on and off. These commands are sent to the device from the Control4 system when you select a source, or turn the room off. So if testing the driver from the emulator within Composer, it is intended that the unit does not respond to the ON or OFF buttons here. If power control is needed outside of the normal flow of source selection or room on/off, use the provided POWER_ON and POWER_OFF driver-specific commands. SET BALANCE CONTROL RANGES: 01-49 - Shift balance left, with 01 being max left and 49 being closest to centered. 50 - Centered (no balance adjustment). 51-100 - Shift balance right, with 51 being closest to center and 100 being max right. AC POWER NOTE: Note that this product is designed to power up fully upon receiving AC power, so in the event of a power outage the unit would power on once AC power has been restored. With this in mind, it is recommended to set the POWER ON MAX VOLUME setting in the setup menu to a low or MIN setting to ensure if the system does power on as a result of a power interruption that it does not turn on at a high volume. SYSTEM VARIABLES: This driver includes SPEAKER_A_OUTPUT and SPEAKER_B_OUTPUT system variables that track the state of the speaker outputs for use in programming. Value is either ON or OFF. Destroy All Timers Destroy Timers DIMMER Display Dimmer Toggle TONE_ON Tone Controls On TONE_OFF Tone Controls Off BASS_RESET Reset bass controls to 0 (flat) TREBLE_RESET Reset treble controls to 0 (flat) BALANCE_RESET Reset balance to 0 SPEAKER_A Toggle Speaker A output SPEAKER_B Toggle Speaker B output SPEAKER_A_ON Enable Speaker A Output SPEAKER_A_OFF Disable Speaker A Output SPEAKER_B_ON Enable Speaker B Output SPEAKER_B_OFF Disable Speaker B Output POWER_ON Power Off POWER_OFF Power Off Command Delay-Milliseconds RANGED_INTEGER false 250 100 2500 Maximum Volume Level RANGED_INTEGER false 80 50 100 Delay Before Issuing Power On Command-Seconds RANGED_INTEGER false 0 0 60 Power On Delay-Seconds RANGED_INTEGER false 2 0 25 Volume Ramp Delay-Milliseconds RANGED_INTEGER false 200 50 500 Poll Timer Delay-Seconds RANGED_INTEGER false 60 10 500 Debug Mode LIST false Off Off Print Log Print and Log Audio/Video Control4 certified on 2/28/2017 for software released version: 2.9.1