Rotel Support
We are here to help you with any questions you might have about your Rotel products and devices, or we can offer insight into the world of sound and sound quality.
do you have a question?
Frequently Asked Questions
What audio formats/file types will play on the RDG-1520, RT-09 and RCX-1500?
The RDG-1520, RT-09 and RCX-1500 will play a wide variety of popular audio file formats. Depending upon the type of connection being used, and also the software involved if streaming the audio from a UPnP server will determine which files can be played. The list below details what files will play with each connection type:
- Front Panel USB Input (w/ iPod or iPhone): AAC, AAC+, AIFF, Apple Lossless, MP3, WAV
- Front Panel USB Input (w/ USB Flash Drive): AAC, AAC+, MP3, WAV, WMA
- UPnP Streaming (Windows Media Player 11): MP3, WAV, WMA
- UPnP Streaming (Windows Media Player 12): AAC, AAC+, FLAC*, MP3, WAV, WMA
- Internet Radio: AAC, AAC+, MP3, Ogg Vorbis, WAV, WMA
TVersity, EyeConnect and other third-party UPnP software programs that support additional file types will be recognized by RDG-1520, RCX-1500 and RT-09 but we do not offer support for these programs.
*FLAC files can be streamed via the UPnP server connection, but to do so requires that they be playable on Windows Media Player 12 and this may require a third party program to make them visible to WM12. Only 16-bit FLAC files are supported.
Applicable Models:
RCX-1500 | RDG-1520 | RT-09
What cable is required to use the 12 volt trigger?
The 12 Volt trigger In and Out both require a 1/8” (3.5mm) mono cable. These cables should be available at most local electronics stores.
Applicable Models:
RB-1050 | RB-1070 | RB-1072 | RB-1080 | RB-1091 | RB-1092 | RB-1510 | RB-1552 | RB-1552 MkII | RB-1562 | RB-1572 | RB-1582 | RB-1582 MkII | RB-1590 | RKB-250 | RKB-2100 | RKB-650 | RKB-850 | RKB-8100 | RKB-D850 | RKB-D8100 | RMB-1048 | RMB-1066 | RMB-1075 | RMB-1076 | RMB-1077 | RMB-1085 | RMB-1095 | RMB-1506 | RMB-1512 | RMB-1565 | RMB-1555 | RMB-1575 | RMB-1585
What DACs and Op Amps are used in the RCD-1072?
The RCD-1072 uses the Burr Brown PCM1732 for all audio and HDCD decoding, implemented as an 18-bit DAC, and 2 Burr Brown OPA2277PA Op Amps.
Applicable Models:
RCD-1072
What DACs and Op Amps are used in the RCD-1520?
The RCD-1520 uses the Wolfson WM8740SEDS 24-bit/192kHz DAC for it's digital to analog conversion. The output Op Amps are 2 x Burr Brown OPA2604AP.
Applicable Models:
RCD-1520
What DACs and Op Amps are used in the RCD-1570?
The RCD-1570 uses the Wolfson WM8740SEDS 24-bit/192kHz DAC for it's digital to analog conversion. The output Op Amps are 2 x Burr Brown OPA2604AP.
Applicable Models:
RCD-1570
What DACs and Op Amps are used in the RDV-1040?
The RDV-1040 uses the Asahi Kasei AK4381 24-bit/192kHz DACs, and a single dual NJM4580 Op Amp.
Applicable Models:
RDV-1040
What DACs and Op Amps are used in the RDV-1050?
The RDV-1050 uses three 2 channel Asahi Kasei AK4381 24-bit/192kHz DACs and NJM5532 Op Amps.
Applicable Models:
RDV-1050
What DACs and Op Amps are used in the RDV-1060?
The RDV-1060 utilizes Cirrus Logic CS4396 24-bit/192kHz DACs, and the analog stage of the RDV-1060 includes Burr Brown OPA2134PA and Analog Devices AD712J Op Amps.
Applicable Models:
RDV-1060
What DACs are used in the RCC-1055?
The RCC-1055 uses the Burr Brown PCM1732 for all audio and HDCD decoding, implemented as an 18-bit DAC.
Applicable Models:
RCC-1055
