An “Inverter Overload” error message is usually caused by a dead battery in the RLC-1080. To test this, power off the RLC-1080, then disconnect the internal battery and power on the unit back on. It should note there is no battery but will work normally otherwise. If this is the case, you need only replace the battery in the unit to resolve this.

Replacement batteries are available from a wide range of suppliers. The battery is an APC brand SKU# RBC63. A search of this SKU should yeild many options to order.

Should the Rotel unit lose its internet connection it will automatically try to re-connect but there may be exceptional circumstances when it will be necessary to re-boot the product. To make a complete clean re-boot disconnect the product from the AC and plug it back in again.

The RSX-1055 and RSX-1065 surround receivers have 3 different 6.1/7.1 surround formats available for digital sources – Dolby Digital EX, dts ES, and Rotel XS Expanded surround.  For all dts soundtracks dts ES will decode additional surround information for the center back speakers. With Dolby Digital soundtracks however the default setting for the unit is to use Rotel XS Expanded surround for your center back information. To switch the default mode from Rotel XS to Dolby Digital EX, press the ‘+’ button on your remote control to cycle between both surround modes. Changing the mode to DD EX will set this as the default 6.1/7.1surround mode for all future Dolby Digital sources.

Rotel receivers offer several different Power options, one of which includes a mode to keep the unit powered on at all times.

To change this back to its default power setting, access the OTHER OPTIONS selection of the Main Menu on the OSD.  Change the POWER selection from ALWAYS ON to STANDBY to set it back to default.