有疑问?
常见问题
Should I use an optical (Toslink) or coax digital cable for digital audio?
The debate rages on. Toslink fans claim said cable is more accurate because it relies on light transmission, which has less resistance and is usually more affordable. Coax supporters argue their cable is better protected with its thicker jacket and offers a tighter connection. Interestingly, high quality RCA video interconnects have been substituted for digital coaxial with similar results since video interconnects fit the same specifications used for digital audio. However, do not use a standard RCA audio cable in place of a digital coaxial cable. In the end, your ears are the final judge over which way to go.
适用机种:
A12 | A14 | RA-11 | RA-12 | RA-1570 | RA-1572 | RA-1592 | RAP-1580 | RC-1570 | RC-1572 | RC-1590 | RDD-1580 | RDG-1520 | RSP-1066 | RSP-1068 | RSP-1069 | RSP-1098 | RSP-1570 | RSP-1572 | RSP-1576 | RSP-1582 | RSX-1055 | RSX-1056 | RSX-1057 | RSX-1058 | RSX-1065 | RSX-1067 | RSX-1550 | RSX-1560 | RSX-1562
Should the analog or digital outputs be used to connect my Rotel DVD-Audio player to the processor or receiver?
To gain the full benefits of DVD-Audio media, the analog connections of the DVD player must be used, and when connecting to a Rotel Surround Processor or Receiver it is recommended that the analog outputs be connected to the 6 Channel Multi Input, as this input is a pure analog input that will not digitally process the high resolution DVD-Audio signal. These players will also internally decode Dolby Digital, dts and PCM (Stereo) digital audio signals as well for DVD and CD playback and as such the analog connection is the only required connection for playback of all formats. A digital cable can also be connected to the processor or receiver for convenience purposes to allow Dolby Digital and dts processing to be handled in the processor without requiring the manual selection of the Multi Input for DVD Video playback.
适用机种:
RDV-1050 | RDV-1060 | RDV-1080 | RDV-1092 | RDV-1093
Should the analog or digital outputs be used to connect the RDV-1040 to the processor or receiver?
A digital cable should be connected to the surround processor or receiver to allow Dolby Digital and dts decoding to be handled in the processor for multichannel playback. The analog audio connections can also be used for stereo playback, for example for CD audio or in a stereo home system.
适用机种:
RDV-1040
Switching from FM or DAB radio to Internet radio takes 15-20 seconds for the station to be received.
This is normal - you will find that the product re-acquires your network before being able to select the station that you want, which can take several seconds.
适用机种:
RCX-1500 | RDG-1520 | RT-09 | RT-12
The 12 Volt triggers are not working.
To use the 12 volt trigger on the RSX-1055 or RSX-1065 requires a 3.5mm Mono to Mono cable, which is not included with the unit but can be purchased from any local electronics supply store, such as Radio Shack. The 12V trigger current output of the RSX 1055 is enough to trigger one 200mA device, or two lower current devices such as other Rotel components. Some other manufacturer’s components do require more current than this to use their triggers, however. In such cases, using a Xantech AC-1 12V Trigger to switched AC outlet may be useful. If the 12V triggers turn on the components but do not turn off, this often means the second zone is activated. If either zone is active, the 12V triggers will remain on.
适用机种:
RSP-1066 | RSX-1055 | RSX-1065
The 12 Volt triggers are not working.
To use the 12 volt triggers on this model requires a 3.5mm Mono to Mono cable, which is not included with the unit but can be purchased from most electronics stores or online.
The 12V trigger current output of the unit is 15mA. Some other manufacturer’s components do require more current than this to use their triggers, however. In such cases, using a Xantech AC-1 12V Trigger to switched AC outlet may be useful.
适用机种:
A10 | A11 | A12 | A14 | RA-02 | RA-10 | RA-11 | RA-12 | RA-1060 | RA-1062 | RA-1070 | RA-1520 | RA-1570 | RA-1572 | RA-1592 | RC-1070 | RC-1082 | RC-1090 | RC-1550 | RC-1570 | RC-1572 | RC-1580 | RC-1590
The display just says "Starting..." and never changes.
The unit requires a solid connection to the internet to start up any inputs besides the CD player and Aux inputs. If the screen says "Starting..." for more than a minute or two, please confirm that a USB dongle, either the supplied Wireless or Wired version, is plugged into the USB input on the back panel of the unit.
Please do be aware the RJ45 socket on the back panel of the unit is not an Ethernet connection, this is used for serial control only, so make sure to use the supplied USB dongle for the internet connection. If you are not sure how to connect to your LAN please refer to our Step-by-Step guides available on www.rotelradio.com.
适用机种:
RCX-1500 | RDG-1520 | RT-09 | RT-12
The display just says "Wireless Driver Error" and never changes.
If this message appears then power off the unit, unplug the wireless dongle and plug it back in, then power the unit back on. If the message reappears it may mean there is a fault with the wireless dongle so please contact your dealer for assistance.
适用机种:
RCX-1500 | RDG-1520 | RT-09
The DVD player is on and there is video, but no sound.
For Dolby Digital and dts decoding, the DVD player should be connected to the RSX 1065 via either a coaxial digital or optical cable to one of the 5 digital inputs on the RSX 1065. After physically connecting the cable, the digital input also needs to be assigned to a particular input on the receiver. In this case, the digital input must be assigned to the input the DVD player’s video is connected to. To do this, access the OSD and select the INPUT SETUP menu from the Main Menu. There, the INPUT can be changed from Analog to the appropriate digital input.
适用机种:
RSP-1066 | RSP-1068 | RSP-1098 | RSX-1055 | RSX-1056 | RSX-1057 | RSX-1065 | RSX-1067
