有疑问?
常见问题
What DACs and Op Amps are used in the RDV-1040?
The RDV-1040 uses the Asahi Kasei AK4381 24-bit/192kHz DACs, and a single dual NJM4580 Op Amp.
适用机种:
RDV-1040
What DACs and Op Amps are used in the RDV-1050?
The RDV-1050 uses three 2 channel Asahi Kasei AK4381 24-bit/192kHz DACs and NJM5532 Op Amps.
适用机种:
RDV-1050
What DACs and Op Amps are used in the RDV-1060?
The RDV-1060 utilizes Cirrus Logic CS4396 24-bit/192kHz DACs, and the analog stage of the RDV-1060 includes Burr Brown OPA2134PA and Analog Devices AD712J Op Amps.
适用机种:
RDV-1060
What DACs are used in the RCC-1055?
The RCC-1055 uses the Burr Brown PCM1732 for all audio and HDCD decoding, implemented as an 18-bit DAC.
适用机种:
RCC-1055
What DACs are used in the RCD-1070?
The RCD-1070 uses the Burr Brown PCM1732 for all audio and HDCD decoding, implemented as an 18-bit DAC.
适用机种:
RCD-1070
What DACs are used in the RSP-1582?
The RSP-1582 utilizes six Wolfson 24bit/192kHz devices which are arrayed as four independent DACs for Front Left, Front Right, Center and Subwoofer channels with shared stereo DACs for the rear channels. This topology offers exemplary performance all around, but provides the absolute best quality on the most critical channels.
适用机种:
RSP-1582
What do I need to run additional zone speakers off my Rotel receiver or processor?
Many Rotel receivers and processors support up to 4 independet rooms (or zones) of audio. To expand beyond the main room, you will need at least one additional amplifier such as the RMB-1506 or RMB-1512 to power the extra speakers.
Also, if you are only running a 5.1 speaker system with the RSX-1560 or RSX-1562, the additional 2 channels of the built in amplifiers on this model can be redirected to power one of the additional zones in the system.
适用机种:
RSP-1066 | RSP-1068 | RSP-1069 | RSP-1098 | RSP-1570 | RSP-1572 | RSX-1055 | RSX-1056 | RSX-1057 | RSX-1058 | RSX-1065 | RSX-1067 | RSX-1550 | RSX-1560 | RSX-1562 | RX-1050 | RX-1052
What does the "REPLY" button do?
Use the Reply Key to "END" a texted entry in place of finding "END" in the list and pressing Enter. The Reply Key will automatically send the End command and Enter command.
适用机种:
RCX-1500 | RDG-1520 | RT-09 | RT-12
What formats will my Rotel CD player handle?
All Rotel CD players can read Red Book audio CDs, or CDRs that are burned with standard CD audio tracks. However, we cannot guarantee 100% compatibility with every CDR due to the large differences in media and CD writers available.
The following models can also read CDRs that contain MP3 files:
- RCC-1055 V02
- RCD-12
- RCD-1520
- RCD-1570
- RCX-1500
The following models can also read CDRs that contain WMA files:
- RCD-12
- RCD-1520
- RCD-1570
- RCX-1500
适用机种:
RCC-1055 | RCD-06 | RCD-12 | RCD-1070 | RCD-1072 | RCD-1520 | RCD-1570 | RCX-1500
