Rotel Support
We are here to help you with any questions you might have about your Rotel products and devices, or we can offer insight into the world of sound and sound quality.
Most Rotel surround systems will allow you to enjoy the benefits of these new audio formats, but the exact method to go about this does vary depending on the model you own. Please refer below for details on how to best connect your system to play back these HD formats.
Most Rotel surround processors and receivers can be reset by selecting the FACTORY DEFAULT option from the DEFAULT Menu of the On Screen Display.
On RSP-1572 and RSX-1562 models loaded with software V2.0.6 or later an alternative reset is also available by pressing and holding the VIDEO 4 and MULTI INPUT front panel buttons simultaneously for 10 seconds while the unit is powered on. The unit will power down to Standby, and when powered back on it will be in its factory default state.
In some circumstances it may be helpful to perform a factory default reset on the unit. This can be done by powering off the RA-1070 or RC-1090, then pressing and holding the following 2 buttons on the front panel – Listening Select PHONO and Recording OFF. Power the unit back on while holding these 2 buttons and the unit will be reset to its factory default settings.
In some circumstances it may be helpful to perform a factory default reset on the RA-11/RA-12. This can be done by powering on the RA-12, then press the MENU key on the front panel, or SETUP button on the remote to access the setup menu. Use the MENU key or the UP/DOWN buttons on the remote to toggle through the menu options until the display shows “Factory Reset RIGHT=Yes”. Press the RIGHT key on the front panel or remote to perform a factory reset. The unit will ask for confirmation, press RIGHT again to confirm.
In some circumstances it may be helpful to perform a factory default reset on the RA-1520. This can be done by powering on the RA-1520, then with the unit powered on, press and hold the MUTE button for 5 seconds on the remote control. The LED for the listening CD button will turn on to indicate the unit has been reset.
In some circumstances it may be helpful to perform a factory default reset on the RA-1570. This can be done by powering on the RA-1570, then press the MENU key on the front panel, or SETUP button on the remote to access the setup menu. Use the MENU key or the UP/DOWN buttons on the remote to toggle through the menu options until the display shows “FACTORY DEFAULT”. Press the + key on the front panel or remote to select 'YES' and press ENTER to perform a factory reset.
In some circumstances it may be helpful to perform a factory default reset on the unit. This can be done by powering on the RC-1082, then pressing and holding the following 2 buttons on the front panel – Listening Select PHONO and Recording OFF. The unit will be reset to its factory default settings.
In some circumstances it may be helpful to perform a factory default reset on the RC-1570. This can be done by powering on the RC-1570, then press the MENU key on the front panel, or SETUP button on the remote to access the setup menu. Use the MENU key or the UP/DOWN buttons on the remote to toggle through the menu options until the display shows “FACTORY DEFAULT”. Press the + key on the front panel or remote to select 'YES' and press ENTER to perform a factory reset.
In some circumstances it may be helpful to perform a factory default reset on the unit. This can be done by powering on the RC-1580, then pressing and holding the following 2 buttons on the front panel – Listening Select PHONO and Recording OFF. The unit will be reset to its factory default settings.
扫一扫以下二维码或者搜索微信公众号即可关注,获取最新鲜的ROTEL资讯!
微信公众号:rotel-hifi