Wsparcie Rotel
Jesteśmy tu po to, by odpowiedzieć na wszystkie pytania dotyczące produktów i urządzeń Rotel, a także by otworzyć drzwi do świata dźwięku o wysokiej jakości.
In some circumstances it may be helpful to perform a factory default reset on the RC-1590. This can be done by powering on the RC-1590, then press the MENU key on the front panel, or SETUP button on the remote to access the setup menu. Use the MENU key or the UP/DOWN buttons on the remote to toggle through the menu options until the display shows “FACTORY DEFAULT”. Press the + key on the front panel or remote to select 'YES' and press ENTER to perform a factory reset.
In some circumstances it may be helpful to perform a factory default reset on the unit. This can be done by powering on the RCX-1500, then press SETUP on the remote. Scroll down and select FACTORY DEFAULT and press SEL on the remote to select it. Press SEL, then DOWN on the remote so that the cursor is highlighting "Yes" on the Module section of the Reset menu. Then press SEL. Immediately after doing this, press SETUP again and go back to the FACTORY DEFAULT menu. This time, just press DOWN on the remote so that "Yes" is highlighted on the Main option, and press SEL to reset it.
In some circumstances it may be helpful to perform a factory default reset on the unit. This can be done by powering on the RDD-1580, then press and hold the front USB source input key for 5 seconds until all source LEDs are blinking. Release the USB source input key and the unit will restore factory default settings and restart.
In some circumstances it may be helpful to perform a factory default reset on the unit. This can be done by powering on the RDG-1520/RT-09, then press SETUP on the remote. Scroll down and select FACTORY DEFAULT and press SEL on the remote to select it. Press SEL, then DOWN on the remote so that the cursor is highlighting "Yes" on the Module section of the Reset menu. Then press SEL. Immediately after doing this, press SETUP again and go back to the FACTORY DEFAULT menu. This time, just press DOWN on the remote so that "Yes" is highlighted on the Main option, and press SEL to reset it.
In some circumstances it may be helpful to perform a factory default reset on the RDV-1040. This can be done by first unplugging the unit. With the unit unplugged, press and hold the STOP and PLAY buttons simultaneously, then reconnect the power cord and release the two buttons. The front panel should read 'JC 0'. Press and release the PAUSE button. The Progressive LED will illuminate and the front display will change to 'JC 00'. Power down the unit using the STANDBY button to complete the reset.
In some circumstances it may be helpful to perform a factory default reset on the RDV-1045. This can be done by first unplugging the unit. With the unit unplugged, press and hold the STOP and PLAY buttons simultaneously, then reconnect the power cord and release the two buttons. The front panel should read 'TEST 1U10'. Press and release the >>| button. The front display will change to 'TEST 1U4 0' and then change again to 'TEST 1U4 00'. Power down the unit using the STANDBY button to complete the reset.
In some circumstances it may be helpful to perform a factory default reset on the RDV-1050. This can be done by first unplugging the unit. With the unit unplugged, press and hold the STOP and PLAY buttons simultaneously, then reconnect the power cord and release the two buttons. The front panel should read 'JC 0'. Press and release the PAUSE button. The front display will change to 'JC 00'. Power down the unit using the STANDBY button to complete the reset.
In some circumstances it may be helpful to perform a factory default reset on the RDV-1060. This can be done by first removing any disc that may be loaded from the player, then accessing the OSD by pressing the OSD button on the remote control. Select the PREFERENCES option, and from the Preferences screen select DEFAULTS and press the cursor button to highlight RESET. Pressing the PLAY button on the remote will reset the RDV-1060 to its factory default configuration.
With the unit unplugged, press and hold the STOP and PLAY buttons simultaneously, then reconnect the power cord and release the two buttons. The front panel should read 'TEST 1U'. Press and release the TRACK>>| button, followed by the PAUSE button. Wait approximately 6 seconds for the DVD-Audio LED to illuminate, then power down the unit using the STANDBY button to complete reset.
扫一扫以下二维码或者搜索微信公众号即可关注,获取最新鲜的ROTEL资讯!
微信公众号:rotel-hifi