Suporte Rotel
Estamos aqui para ajudá-lo com qualquer dúvida que possa ter sobre seus produtos e dispositivos Rotel, ou podemos oferecer uma visão sobre o mundo do som e da qualidade do som.
The RDV-1050 does support bass management settings for Dolby Digital and dts playback only. There is no bass management applied to DVD-Audio or CD audio outputs. The bass management applies only to the analog outputs of the RDV-1050, and utilizes a 100Hz crossover for all speakers set to small.
The RDV-1060 does support bass management settings for Dolby Digital and dts playback only. There is no bass management applied to DVD-Audio or CD audio outputs. The bass management applies only to the analog outputs of the RDV-1060, and utilizes a 100Hz crossover for all speakers set to small.
The RDV-1092 and RDV-1093 do include bass management settings for Dolby Digital and dts playback only. There is no bass management applied to DVD-Audio or CD audio outputs. The bass management applies only to the analog outputs of the player, and utilizes a 100Hz crossover for all speakers set to small.
The Rotel does not have to be powered on to pass signal through its Link Outputs. Signal can be passed through the amplifier regardless of whether the amplifier is powered on or in standby mode.
First, start with your TV. If the TV's picture isn't very good, DVD software won't look very good either. There are a couple of instructional DVDs that show you how to properly calibrate your TV to look its best. Among other tips, these usually involve turning down the brightness and sharpness controls, as set manufacturers tend to increase both at the factory to maximize visual impact on the sales floor.
Now that your TV is good to go, you'll want to use the best output from the DVD player to your TV. Most DVD players offer HDMI, composite, S-Video, and component video outputs. If your TV has an HDMI or component input, use it. S-Video, which separates color from black and white signals, can provide up to a 60% sharper picture over composite. The film-like quality of both component video and HDMI is the best of all.
Most A/V receivers/processors allow you to route your video signal through the receiver to the TV. This provides the added convenience of on screen graphics and video switching, but at the risk of slightly reduced video quality. To obtain the purist picture, many videophiles connect their video sources directly to their TV after they've used the on screen graphics to do their initial set-up.
The RSP-1582 can be reset by selecting the FACTORY DEFAULT option from the SYSTEM SETUP Menu of the On Screen Display.
If you want to add streaming music to your Rotel system there are several different ways you can do so.
If you want to add streaming music to your Rotel internet radio system there are several different ways you can do so.
To add Pandora, once you have registered your radio and signed up an account on www.rotelradio.com, you can link your Pandora account under the 'See extra features' section of the website. Once it has been linked, it will be available under the 'My Stuff' section of the Rotel device. Note that Pandora is only available in the continental USA.
To add other services such as Tidal or Spotify, below are some options.
If you want to add streaming music to your Rotel system there are several different ways you can do so.
扫一扫以下二维码或者搜索微信公众号即可关注,获取最新鲜的ROTEL资讯!
微信公众号:rotel-hifi